Kitchen Remodeling Contractors in Houston

Do you want to learn how to make your own kitchen cabinets? Building kitchen cabinets might not be as hard as you’d think. All you need are the right materials and a set of instructions like those we’ve included below.

Get the satisfaction of building your own cabinets, as well as tailor them to suite your specific needs and design style.

Here’s What You Need
Materials needed:

Dowels
Table
Saw
Jigsaw
Router
Drill
Sander
Sandpaper
Clamps
Wood Glue
½-inch Plywood
1×6 Lumber
Drawer Slides
Measuring Tape
Hinges
Knobs
Flathead Screws
Finishing Nails
Wood Putty

Here are the Steps:
1. Measurements
Figure out the measurements of where you intend to install the cabinets. After, move the measurements you got to the ½ inch plywood to be able to assemble the pieces. Use the saw to start cutting the plywood in accordance to the measurements. There are tons of cabinet blueprints online that you can find.

2. Cabinet Pieces
Put pieces together as needed for your desired design by nailing the cut portions. Use the finishing nails for this process. Strengthen the frame with wood glue. Use clamps for holding the pieces together while the glue dries.

3. Face frame to the cabinet
Bore holes to the fastened surface of the face frame. This frame will be needed to hold the doors that connect to the cabinet. You will need four pieces of 1×6 lumber for every cabinet that you wish to make. You can now attach the lumber pieces – use wood screws. Now you’ve got your frame. Drill the necessary holes into the face frame then with nails, append to the cabinet frame. Use the wood putty to coat the nail hollow, after nailing.

4. Cut the doors
To make doors for the frames of the cabinet, cut the plywood into a size of ¼ to 3/8 inches extend beyond for the purpose of easy opening. The table saw should be used in cutting the plywood. The next thing to do is to sand the edges for a smooth outcome.

5. Apply wood stain
Pretty simple. Follow the instructions of the wood stain you’ve purchased.

6. Do the installation
When your cabinets are dry, you are ready to install your kitchen cabinets. Attach the cabinets to the studs. Screw the cabinets into the studs and finally, attach the cabinet doors to the cabinets.

Source

Popularity: 2% [?]